OWNER’S MANUAL V. 1 ENGLISH
PT-298 STR TREADMILL
This manual is available at
www.salter.es
3
ENGLISH
2. TOOLS KIT
3. ASSEMBLY INSTRUCTIONS
STEP 1
Take out the treadmill from the carton and lay it aside on the smooth ground.
STEP 2
1.
Take the Left and Right upright tubes (part numbers
5
&
4
) and slide the upright covers (
99
&
100
right) onto
the tubes (observe the cover orientation is correct). Connect the Middle Console Cable (
38
) that exits from the
bottom of the right upright tube with the lower Console Cable (
39
). Insert the Left and Right (
5
&
4
) Uprights
into the Left and Right Receiving Tubes (holes are on the outside of the tubes). Be careful not to pinch the wire
when installing the upright.
NOTE: Partially tighten all bolts in this Step. This will allow for easier console assembly.
2.
Attach the tubes with three Button Head Socket Bolts (
93
) from each side and two Button Head Socket Bolts
(
93
) and two Curved Washers (
94
) from the front. Partially tighten using the Combination M5 Allen Wrench &
Phillips Head Screw Driver (
96
).
num.
97
. M6 Allen
Wrench
num.
33
. Safety Key
num.
96
. Combination M5 Allen
Wrench & Phillips Head Screw Driver
num.
122
. Phillips Head
num.
58
. Deck/Belt Lubricant