9159LD
GB
IE
NI
MiBODY
Salter MiBody is a range of connected devices to
make weight and health management easier. Measurements
are sent wireless to your mobile device and can be viewed using the free to
download MiBody App. Trends can be tracked over time and the measurements
explained with healthy/recommended ranges. The results are stored on your personal
mobile device and are private unless you choose to share your achievements.
MiBody should be used in addition with and not as a substitute to professional
medical guidance. If you are concerned about any aspect of your health please seek
professional medical guidance.
HOW DOES THIS SALTER SCALE WORK?
This Salter scale uses BIA (Bio Impedance
Analysis) technology which passes a tiny electrical impulse through the body to
determine fat from lean tissue, the electrical impulse cannot be felt and is perfectly
safe. Contact with the body is made via stainless steel pads on the platform of the
scale.
This method simultaneously calculates your personal weight, body fat, total body
water, BMI and muscle mass, giving you a more accurate reading of your overall
health and fitness. This scale stores the personal data of up to 4 users. As well as
being an analyser scale, this scale can be used as a conventional scale.
PREPARING YOUR SCALE 1.
Open the battery compartment on the scale underside.
2.
Remove isolating tab from beneath the battery (if fitted) or insert batteries
observing the polarity signs (+ and -) inside the battery compartment.
3.
Close
the battery compartment.
4.
Position scale on a firm flat surface.
5.
For use
on carpet or uneven floors separate carpet feet are available. Please visit www.
salterhousewares.co.uk to select the carpet feet available for your model.
MiBODY APP
Before using your device for the first time:
1.
Download and install
the Salter MiBody App from the App store. Use keyword search terms “Salter” or
“MiBody”.
2.
Turn Bluetooth “On” in the “Settings” menu of your mobile device.
3.
Open the MiBody App and follow the on screen instructions to set up your user
account.
PAIRING DEVICES
1. Turn Bluetooth “On” in the “Settings” menu of your mobile device.
2. Open the MiBody App.
3. Press the button.
4. Press “
Add Device
”.
5. Turn on the scale.
6. Press and hold the “
UNIT
” button on the base of the scale until is displayed on
the screen.
7. On your mobile device, touch the scale icon to connect with the scale. Select the
user number you wish to pair. Touch the
Done
button to finish.
8. If pairing is successful will be displayed.
9. If pairing is unsuccessful will be displayed.
10. The scale will automatically switch off.
11. Repeat procedure for each user and each mobile device.
Note:
Each user number can only be paired with one mobile device. Results will be
sent to the paired device only.
INITIALISING YOUR SCALE 1.
Press the platform centre and remove your foot.
2.
‘
0.0
’ will be displayed.
3.
The scale will switch off and is now ready for use.
This initialisation process must be repeated if the scale is moved.
At all other times step straight on the scale.
WEIGHT READING ONLY
This scale features our convenient step-on operation. Once
initialised the scale can be operated by simply stepping straight on the platform – no
more waiting!
1.
Step on and stand very still while the scale computes your weight.
2.
Your weight is displayed.
3.
Step off. Your weight will be displayed for a few
seconds.
4.
The scale will switch off.
PERSONAL DATA ENTRY
1. Press the platform centre and remove your foot.
2. Press the button.
3. While the user number is flashing, select a user number by pressing the or
buttons. Press the button to confirm your selection.
4. The weight mode display will flash.
Press or button until the correct symbol is flashing, then press the button.
5. The male or female symbol will flash. Press or to select male/female/male
athlete/female athlete, then press the button.
Athlete Mode:
An athlete is defined as a person who is involved in intense physical activity
of approximately 12 hours per week and who has a resting heart rate of
approximately 60 beats per minute or less.
6. The height display will flash.
Press or as necessary to set your height, then press the button.
7. The age display will flash.
Press or as necessary to set your age, then press the button.
8. The display will show your settings, then switch off. The memory is set.
9. Repeat procedure for a second user, or to change user details.
Note:
To update or overwrite the memorised data, follow the same procedure,
making changes as required.
WEIGHT & BODY FAT READINGS
1. Position scale on a firm flat surface.
2. Press the platform centre and remove your foot.
3. Press the button.
4. Whilst the user number is flashing select your user number by pressing the
or buttons.
5. Wait while the display reconfirms your personal data then shows a zero reading.
6. When zero is displayed, with bare feet, step onto the platform and stand still.
7. Your weight will be displayed followed by BMI, body fat, body water and muscle
mass.
8. If the user number is paired with a mobile device will be displayed and the
data will be sent wirelessly to your mobile device.
9. If the device is out of range or the App is closed will be displayed and the data
will be saved on the scale and transferred next time the scale is used.
10. The scale will switch off.
Note:
To receive data the MiBody App must be open or running in the background.
The MiBody App will not receive data if it is closed completely or Bluetooth is turned
off.
WHAT DOES MY BMI VALUE MEAN?
Body Mass Index (BMI) is an index of weight-for-height that is commonly used
to classify underweight, overweight and obesity in adults. This scale calculates
your BMI value for you. The BMI categories shown in the chart and table below are
recognised bythe WHO (World Health Organisation) and can be used to interpret your
BMI value. Your BMI category can be identified using the table below.
BODY ANALYSER SCALE
Instructions and Guarantee
IMPÉDAN CEMÈTRE • KÖRPER-ANALYSE-WAAGE • LICHAAMSANALYSE WEEGSCHAAL • KROPSANALYSEVÆGT