8
S122
User /
Service Instructions
1 Warnings
1.4 Safe handling
●
When testing or fault finding, exercise extreme care.
Ensure that any test equipment used is in good condition
and capable of with
standing the existing voltages.
●
All tools used must have insulated handgrips. Test probes
and jumper leads must be in good condition with
adequate insulation. Test probes with claw ends and
jumper leads must not have insecure parts that may fail
during use.
1.4
Safe handling
When lifting, moving or supporting the
scale
, take its
weight into consideration.
1.5
ESD handling precautions
When handling printed circuit boards and electronic
components, observe the following ESD handling
precautions:
●
Wear an
grouned
antistatic wrist strap.
●
Ensure that all electronic components/boards are stowed
appropriately, by use of conductive/antistatic work
surfaces and packaging.
