18” Wide Standard Lockers
–
18
-
5
1000 Series
Single Tier Installation Instructions
Three Wide Locker Assembly (continued)
Step 7:
Attach the last side panel and the right rear leg to the assembly of Step 6. On
15” deep lockers attach the last single coat hook. Attach a double bend and install the
last coat rod. The locker chassis is now complete.
Step 8:
Position the pre-assembled door frames onto the assembly of Step 7 then
fasten one by one.
Step 9:
Tighten all fasteners checking for squareness of the locker while tightening.
Attach optional sloping hoods, end bases or front bases (see pages 4 and 5).
Step 10:
Place the locker in the installed location and anchor to the floor, wall, or to
both. Individual job conditions will dictate the type of fastening anchors to use (not
provided).
Step 11:
Fasten all lockers in a row together by installing fasteners (provided) through
the side panels. Installation is now complete.
Coat Rod Installation
