EN
3
3.
Press
SET (9)
button again to confirm the clock time setting (hour
and minute digits will become solid when finished)
Alarm 1 Time Setting
1.
In standby mode, press and hold
AL1 (3)
button for 2 seconds until
the hour and minute digits blink.
2.
Press
HR (6)
button to set the hours.
3.
Press
MIN (7)
button to set the minutes.
4.
Press
AL1 (3)
button again to confirm the alarm 1 time setting
(current time indication returns to the display when finished).
Alarm 2 Time Setting
1.
In standby mode, press and hold
AL2 (4)
button for 2 seconds until
the hour and minute digits blink.
2.
Press
HR (6)
button to set the hours.
3.
Press
MIN (7)
button to set the minutes.
4.
Press
AL2 (4)
button again to confirm the alarm 2 time setting (current
time indication returns to the display when finished).
PLEASE NOTE:
When operating from batteries only (during back-up mode),
the display will be off and clock will only remain accurate for a short period of
time. The clock accuracy will decrease due to the voltage drop of the
back-up batteries. It is important that the mains supply is restored as soon
as possible. If no backup battery is installed or the power failure is prolonged,
you will need to set the clock again.
5 Alarm Operation
You can set the radio or buzzer alarms at both preset alarm times in standby
mode :
Wake up by Buzzer or Radio
1. To set or adjust the alarm time, follow the steps in “Clock and Alarm
Time Setting”.
2. To set alarm mode (radio or buzzer) or disable the alarm function for
ALARM 1
, Press
AL1 (3)
repeatedly until the desired alarm mode
appears on the display. Each time you press
AL1 (3),
the alarm indication
changes as follows :
