Chair Maintenance
Note:
Always clear passage of the up/down movement.
1- As shown, Lubrication is MUST be applied quarterly.
2- Check loose wire on limited switch.
3- Do not lubricated excessively.
4- No debris on moving track or the main shaft.
Outside Cover Open zipper
to either side
Under the head
rest, you will find
zippers to open
outside cover. As
shown
Mechanism Cover
Zipper Location
Inner cover lining for
easy access to the
mechanism.
Removable Padding
location
For high density of
massage, remove
extra padding. As
shown
Full view Massage Mechanism
Lubricate Quarterly
Limited switch
Carbon brush
Front view
Top view
Sensor
Location
Massage sensor replacement
Two screw
ON
Off
1- Move down roller by pressing full mode on the remote
Control and turn off on the chair main switch (fig.3).
2- Remove two screws as shown fig.1
3- Gently pull out the PC board (fig.2)
4- And gently pull out wire receptacle (fig.2)
**Reverse the process for replacing the massage sensor**
On/Off
Fig.1
Fig.2
Fig.3
Main Shaft
