Swing Arm Adjustments:
There are three possible adjustments to the swing arm:
1. Adjust the maximum height
– this can be useful if there is a low ceiling.
2. Adjust the counter weight force
– use this adjustment if the Dryer Unit tends to
drift up or down after being set in position.
3. Adjust the angle of the dryer attachment head to be perpendicular
– It
is important that the Dryer attachment post hangs perpendicular, use this
adjustment if required.
1. Max Height
2. Counter Weight
3. Perpendicular
Adjustment
3.
2.
To Adjust Maximum Height:
• Remove screws and cover at
1
.
• Using a wrench, loosen the locking
nut.
• To reduce height limit – turn the
adjustment screw anti-clockwise –
To increase, turn clockwise.
• Tighten locking nut
• Replace the cover and retaining
screws.
To Adjust Counter Weight Force:
With the dryer head attached –
• Remove screw and cover at
2/3.
• Using a metal pin turn the nut
2.
• Test the adjustment by raising
or lowering the Dryer Head and
releasing – If the Head remains in
position the adjustment is correct.
• Replace the cover and retaining
screw.
To Adjust The Dryer Head Post
For Perpendicular
With the dryer head attached –
• Remove screw and cover at
2/3
• Loosen hex nut
3
• Bring Dryer Unit to a perpendicular
position
• Tighten lock nut.
• Replace the cover and retaining
screw.
1.
1.
