9
LIGHT BULB REPLACEMENT
To replace the light bulb for this appliance, follow instructions:
1.
Remove mesh grease filters (refer to instructions if necessary).
2.
Use a tool or by hand press the spring splinter of both sides of LED light to the inside, until the
light is pressed out.
3.
Then gently pull the light connecting wire out and replace the lights.
4.
Apply and reverse procedure to install the light back, and replace the mesh filters.
The light bulb must be replaced by the manufacturer, its service agent or
similarly qualified person.
•
Always switch off the electricity supply before carrying out any operations on the appliance,
including when changing the light bulb.
•
When handling bulb, make sure it is completely cool down before any direct contact to hands.
•
When handling globes hold with a cloth or gloves to ensure perspiration does not come in
contact with the globe as this can reduce the life of the globe.
ILCOS D code for this lamp is: DBR-1.5/65-H-64
Max wattage: 2 x 1.5W
Dimensions: 20.5mm x 64mm
Voltage range: AC 220-240V
64
20.5
