18
REMOVING THE DOOR & GLASS PANELS
REMOVING THE DOOR
It is recommended that the oven door is removed from the oven before removing the internal glass
panels to clean them as the oven door could close again if you try to remove the glass panels before
taking off the oven door.
To remove the oven door, follow the below instructions:
1.
Open the door completely
2.
Position the hooks “A” of the hinges outwards (Fig.7)
3.
Slowly close the door to reach the hooks “A”, making sure that they lock in the slots “B” of the door,
as shown in Fig.8
4.
Using both hands, press lightly inwards on the door, allowing the door hinges “C” to detach from
the slots “D” (see Fig.9), and pull the door towards yourself until it has unhooked from the oven.
REMOVING THE GLASS
The oven door is equipped with three glass panels. It is recommended that the oven door is removed
from the oven before removing the internal glass panels to clean them as the oven door could close
again if you try to remove the glass panels before taking off the oven door.
After removing the oven door from the framework (see REMOVING THE DOOR):
1.
Place the door on a clean and level surface with the inner glass (double glazing) facing toward
you (Figure 3)
2.
Remove the double glazing carefully by raising it approximately 25 degrees (Figure 4) until the
retaining springs unhook.
5.
After cleaning, fit the door back on properly by following the procedure in reverse order.
Reposition the hooks “A” inward before closing the door (Fig.10)