16
Regular cleaning after each use will help protect finishes and reduce risk of debris catching fire.
Surfaces of the appliance are susceptible to scratches and abrasions, so it is important to follow the
cleaning instructions to avoid damage to any surface.
•
Clean the glass oven door with a soft cloth moistened with warm soapy water. Dry it with a soft
cloth. Do not use steel wool, acids or abrasive products that could damage the surface of the
oven. Clean the oven control panel, taking the same precautions.
•
Check that the appliance is cool after use. When cleaning and handling the glass there is a risk
that the glass panels might break if not completely cooled.
•
To clean the metal surfaces, use a regular detergent.
•
Clean the inside of the appliance after each use.
•
Remove stubborn dirt with special oven detergents.
•
After each use, clean the accessories and let them dry thoroughly. Use a soft cloth moistened with
warm soapy water.
•
Do not clean non-stick accessories with strong detergents, this could damage the non-stick
coating.
•
All surfaces can discolour or alter if you use unsuitable products. In particular the front of the
oven can be damage by cleaning sprays and descalers. Remove residual detergent immediately.
•
Regularly check the door seal. The door seal is around the frame of the oven compartment. The
seals must be soft and elastic. To keep the door seals clean, use a non-abrasive sponge with warm
water. Do not operate the appliance if the door seal is damaged.
CAUTION:
Never use a steam appliance to clean the oven. Steam from an electric household appliance
could reach live parts and cause short-circuiting.
CLEANING & MAINTENANCE
CAUTION!
Cleaning & Maintenance operations must only be carried out when
the appliance is cool and disconnected from the power supply. Ensure that you
have read and understood the important safety information before proceeding.
Some household detergents and cleaning products contain harsh chemicals and are abrasive,
they can damage the finish of the appliance and potentially remove printed markings on the
door. Damages caused by improper care will not be covered under manufacturers warranty.