Salini SOB-5002H Instruction Manual Download Page 24

-23- 

 

DECLARATION OF CONFORMITY 

 

Australian Standards 

 

This product has been designed and manufactured to comply with all relevant Australian and 

New Zealand Standards. 

 

AS/NZS 60335.1 General Requirements for Domestic Electrical Appliances 

AS/NZS 60335.2.6 Specific Requirements for Domestic Electrical Cooking Appliances 

This appliance is SAA certified 

 

Installation of the appliance must be only be undertaken by a licenced electrician who can 

provide a compliance certificate. 

 

This appliance is intended for domestic use only. 

 

 

European Standards 

 

o

 

CE: Appliance conforming to the European directives 89/336/EEC, 93/68/EEC, 

73/23/EEC and subsequent revisions and “RoHS” directive 2002/95/CE.* 

                                                             

o

 

The manufacturer declares that the oven is built using certified materials and requires 

the appliance to be installed in accordance with the standards currently in force. This 

appliance must be used by a trained person for domestic purposes only. 

 

*

 

The RoHS directive stands for “the restriction of the use of certain hazardous substances 

in electrical and electronic equipment”. This directive bans the placing on the EU market 

of new electrical and electronic equipment containing more than the agreed levels of 

lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and 

polybrominated diphenyl ether (PBDE) flame retardants. 

 

European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) (for 

European Union countries only) 

 

This appliance is marked according to the European directive 2002/96/EC on Waste Electrical 

and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will 

help prevent potential negative consequences for the environment and human health, which 

could otherwise be caused by inappropriate waste handling of this product. 

The symbol on the product, or on the documents accompanying the product, indicates that this 

appliance may not be treated as household waste. Instead it shall be handed over to the 

applicable collection point for the recycling of electrical and electronic equipment. Disposal must 

be carried out in accordance with local environmental regulations for waste disposal. 

For more detailed information about treatment, recovery and recycling of this product, please 

contact your local city office or your household waste disposal service. 

Summary of Contents for SOB-5002H

























Reviews: