Salicru SLC X-PERT 100, User Manual

Page: 58 / 62

58
SALICRU
Model SLC X-PERT
Power (kVA) 80 100 125 160 200 250 300 400
Active power (kW) 80 100 125 160 200 250 300 400
Phase shift (°)
- Balanced load
- Unbalanced load (100%-0%-0%)
±
1
±
1
Output frequency (Hz) 50 - 60
Output frequency stability
- Internal clock (mains not present) (Hz)
- Inverter synchronised with mains (Hz)
- Max. synchronisation frequency (Hz/s)
±
0.001
±
2
<1
Rated output current (@400 Vac) (A) 115 144 180 231 289 361 433 577
Permissible overload
(min)
>100
...
110%
10
10
(min) >110
...
125% 5
(s) >125
...
150% 30
(ms) >150% 100
Short-circuit current
(2)
(A) 330 400 490 640 720 900 1050 1400
Short-circuit characteristics Limited current with electronic protection
Automatic shutdown after 5 seconds
Output waveform Sine wave
Total harmonic distortion THDv
- With linear load (%)
- With non-linear load (%)
-EN-IEC 62040-3
<1
<5
Requirement compliance
Max. crest factor without degradation 3:1
BYPASS
Automatic bypass Electronic thyristor
Input 3 phases/4 wires
Protection Fuses External
Three-phase rated input voltage (sel.) (Vac)
Tolerance (selectable) (%) 3x380 / 3x400 / 3x415
±
10
Input frequency (selec.) (Hz)
Tolerance (selectable) (%) 50... 60
±
10
Transfer mode Uninterrupted
Transfer from inverter to bypass In case of:
- Short-circuit
- Discharged batteries
- Inverter test
- Inverter failure
Retransfer from bypass to inverter Automatic
Bypass disabled in case of 6 transfers in 2 min, restart by screen
Overload capacity (%) 150% permanently
1000% for 1 cycle
Manual bypass (maintenance) Electronically controlled
Assisted restart procedure without interruption
Backfeed protection NC contact for control of an external device
Automatic bypass Uninterrupted
Tabla 22. SLC X-PERT UPS technical specifications
(1)
For configurations with more devices, contact the manufacturer
(2)
Value refers to IK1 - IK2 - IK3 type short-circuits