6
3. STANDARD AND QUALITY GUARANTEE.
3.1.
DECLARATION OF THE MANAGEMENT.
Our target is the client’s satisfaction, therefore this Management
has decided to establish a Quality and Environmental policy, by
means of installation a Quality and Environmental Management
System that becomes us capable to comply the requirements de-
manded by the standard
ISO 9001
and
ISO 14001
and by our Cli-
ents and concerned Parts too.
Likewise, the enterprise Management is committed with the devel-
opment and improvement of the Quality and Environmental Man-
agement System, through:
•
The communication to all the company about the importance of
satisfaction both in the client’s requirements and in the legal and
regulations.
•
The Quality and Environmental Policy diffusion and the fixation
of the Quality and Environment targets.
•
To carry out revisions by the Management.
•
To provide the needed resources.
3.2. STANDARD.
The
SLC CUBE3+
product is designed, manufactured and com-
mercialized in accordance with the standard
EN ISO 9001
of
Quality Management Systems. The
marking shows the con-
formity to the EEC Directive by means of the application of the fol-
lowing standards:
•
2014/35/EU
. - Low Voltage Directive (LVD).
•
2014/30/EU
. - Electromagnetic Compatibility (EMC).
•
2011/65/EU
. - Restriction of Hazardous Substances in electrical
and electronic equipment (RoHS).
According with the harmonised norms and certified by an external
laboratory. The reference norms are:
•
EN-IEC 62040-1
. Uninterruptible power supply (UPS). Part 1-1:
General and safety requirements for UPS’s used in accessible
areas by end-users.
•
EN-IEC 60950-1
. IT equipments. Safety. Part 1: General re-
quirements.
•
EN-IEC 62040-2
. Uninterruptible power supply (UPS). Part 2:
EMC requirements.
The manufacturers responsibility is excluded in the event of any
modification or intervention in the product by the customer’s side.
WARNING!:
This is a category C3 UPS product. This is a
product for commercial and industrial application in the sec-
ond environment - installation restrictions or additional
measures may be needed to prevent disturbances.
Pay attention to those systems used in vital signs mainte-
nance, medical applications, commercial transport, nuclear
power stations, as well as other applications or loads where
a failure in the product can cause serious personal injuries
or material damages.
Declaration of conformity CE of the product is at the client
disposal under previous request to our headquarters of-
fices.
3.2.1. First and second environment.
The following examples of environment cover the majority of UPS
installations.
3.2.1.1. First environment.
Environment that includes residential, commercial and light in-
dustrial premises directly connected without intermediate trans-
formers to a public low-voltage mains supply.
3.2.1.2. Second environment.
Environment that includes all commercial, light industry and indus-
trial establishments other than those directly connected to a low-
voltage mains that supplies buildings used for residential purposes.
3.3. ENVIRONMENT.
This product has been designed to respect the environment and has
been manufactured in accordance with the standard
ISO 14001
.
Equipment recycling at the end of its useful life:
Our company commits to use the services of authorised societies
and according to the regulations, in order to treat the recovered
product at the end of its useful life (contact your distributor).
Packaging:
To recycle the packaging, follow the legal regulations in force, de-
pending on the particular standard of the country where the equip-
ment is installed.
Batteries:
The batteries mean a serious danger for health and environment.
The disposal of them must be done in accordance with the regula-
tions in force.
USER MANUAL
