13
Pattern 3:
Heavy in the center, no material exists ahead of fans.
Cause:
Divider is too far forward.
Cure:
Move divider toward rear.
Pattern 4:
Heavy at outer edges. Excessive material strikes front deflector panels.
Cause:
1. Divider is too far rearward.
2. Spinner speed too fast.
Cure:
1. Adjust divider forward.
2. If adjusting divider does not fix
problem, adjust spinner speed.
Pattern 5:
Good pattern
Cause:
Proper spinner and divider setting
Effect:
Material exits on an arc from near the
spinners to front deflector. Pattern
density tapers off to nothing at outer
10% on each side of total spread
width.
Flow
Divider
Gauge
Flow Divider
Crank
Summary of Contents for BBI Cricket 50
