Salente JetSteam Pro, Manual

Page: 25 / 47

25
Ways to use a handheld steam cleaner
1. D isconnect the steam cleaner from the mains and make sure the
appliance has cooled down.
2. Press the handheld unit removal button on the main body to remove the
handheld unit.
3. Turn the lid of the water tank counterclockwise and open it. [3]
4. Fill the reservoir with clean cold water and fit the cap. [4] Do not add
any chemicals, detergents or perfumes to the clean water tank.
5. Plug the steam cleaner into the mains. 3 lights flashing in a loop.
6. After a few seconds, the LED stops flashing and one light remains on to
indicate that the steam cleaner is ready for use.
7. To produce steam, press the manual steam trigger to release the steam.
[7]
8. The steam control button allows you to select low, medium or high
steam volume depending on your specific cleaning requirements. [8]
IMPORTANT: Always unplug the cleaner when removing the floor head or
handle. Always make sure the cleaner has cooled completely before
removing the floor head.
Accessories
COMMENT: The accessory can only be connected to a hand -held steam
cleaner. IMPORTANT: Before each use, check the seal on the steam nozzle,
if the seal is missing or damaged, do not use the appliance and contact an
authorised service centre.
Connecting the flexible extension hose and nozzles to the handheld steam
cleaner
1. Place the brush attachment or flexible extension hose on the handheld
unit and slide it in until the tool is locked in place.
2. Fit the supplied accessories onto the brush attachment or the flexible
extension hose, insert them and turn them clockwise until they are locked
in place.
IMPORTANT: Before using the handheld steam cleaner, make sure that
the hose and accessories are securely fastened, if steam leaks from the
joint, it means that the hose and accessories are not properly fastened, let