24
Remove all components from the packaging
1. Insert the handle into the steam cleaner holder until it is securely locked.
[1]
2. Insert the handheld unit into the steam cleaner holder.
[2]
Using a steam cleaner
BEFORE CLEANING
1. Turn the lid of the water tank counterclockwise and open it.
[3]
2. Fill the water tank with clean cold water and fit the water tank cap.
[4]
Do not add any chemicals, detergents or perfumes to the clean water tank.
COMMENT:
It is recommended to use dis
tilled or demineralised water in the
machine to significantly reduce mineral deposits and extend the life of the
steam mop.
3. Attach the microfibre mop to the floor mopping head.
IMPORTANT:
Always disconnect the cleaner from the mains when refilling
the w
ater or changing the mop.
COMMENT:
Wash the mop before use to remove any lint.
STEAM CLEANING OF HARD FLOORS
IMPORTANT:
Do not use the steam cleaner without a mop attached to the
floor head.
COMMENT:
Do not use the Carpet Cleaning Attachment when cleaning
hard floors.
1. Plug the steam cleaner into the mains. 3 lights flashing in a loop.
2. After a few seconds, the LED stops flashing and one light remains on to
indicate that the steam cleaner is ready
for use.
3. Tilt the cleaner by placing your foot on the floor head and lowering the
handle towards the floor.
[5].
This automatically starts the steam cleaner.
By returning the handle back to the upright position, the steam cleaner
automatically switches
off.
4. Move the cleaner slowly back and forth to clean the desired surface.
5. The steam control button allows you to select low, medium or high
steam volume depending on your specific cleaning requirements.
[8]
Summary of Contents for JetSteam Pro
