Salda SMARTY XV Series, Manual

Page: 24 / 48

24 | DE SMARTY XV v2019.06
A . 
Alarm! Too low supply temperature. System
stopped
 . 
Warning! DX cooler failure
A . 
Alarm! Too high supply temperature. System
stopped
A . 
Alarm! Fire

.
2
Warning! Change supply air filter (pressure relay)
A
.
2
Alarm! Supply fan pressure protection. System
stopped
 . 3
Warning! Change extract air filter (pressure relay)
A . 3
Alarm! Extract fan pressure protection. System
stopped.

.

Warning! Change supply and extract filters (time -
out)
A
.

Alarm! Internal system error.
A . 5
Alarm! Power supply failure. Please, check F1 fuse
A . 5
Alarm! Heater manual protection. Boosting.
 . 6
Warning! Supply air temperature sensor failure.
Emergency run
A . 6
Alarm! Pre-heater manual protection. Boosting.

.
7
Warning! Extract air temperature sensor failure.
Emergency run
A
.
7
Alarm! Internal communication error
 . 
Warning! Exhaust air temperature sensor failure.
Emergency run
 . 
Warning! DX cooler defrosting
 . 
Warning! Outdoor air temperature sensor failure.
Emergency run
 . 
Warning! Too high 3 days extract humidity. Increas-
ing air flow.

.
2
Warning! Hydronic heater water temperature sen-
sor failure. Emergency run

.
5
Warning! Too high extract humidity. Boosting.
 . 2
Warning! Hydronic pre-heater water temperature
sensor failure. Emergency run
A . 5
Alarm! Rotor broken belt alarm. System stopped.

.
22
Warning! Hydronic cooler water temperature sensor
failure. Emergency run

.
52
Warning! Gas heater failure

.
23
Warning! Controller cabinet temperature sensor
failure. Emergency run

.
53
Warning! Gas pre-heater failure
A . 2
Alarm! Supply air temperature sensor failure.
System stopped
 . 5
Warning! Too high condensation level
A
.
25
Alarm! Extract air temperature sensor failure.
System stopped

.
55
Warning! Supply fan failure. Emergency run
A
.
26
Alarm! Exhaust air temperature sensor failure.
System stopped

.
56
Warning! Extract fan failure. Emergency run
A . 27
Alarm! Outdoor air temperature sensor failure.
System stopped
 . 57
Warning! Too low supply air flow for DX cooler
A
.
2
Alarm! Hydronic heater water temperature sensor
failure. System stopped
A.5
Alarm! Bypass damper failure. System stopped.
A . 2
Alarm! Hydronic pre-heater water temperature
sensor failure. System stopped
A.5
Alarm! Hydronic heater/pre-heater circ. pump failute. System
stopped.
A . 3
Alarm! Hydronic cooler water temperature sensor
failure. System stopped
W.6
Warning! Hydronic heater/pre-heater circ. pump failute.
19.26. EVENT LOG (HISTORY)
The system records 50 recent events (failures, alarms, fire damper testing results, etc.).
The log stores the description of events and time.
The event log may be reviewed in the window
ADJUSTER › HISTORY
or
USER › MENU › HISTORY
.
19.27. SYSTEM VERSIONS AND RUNNING TIME
In the section
ADJUSTER › USER SETTINGS › ABOUT
you may see software and configuration versions that are saved in the production line namely to every unit.
Next to them the running time since the unit has been manufactured is also displayed. It is calculated when the fans are rotating.
20. WIRING DIAGRAM
Electrical equipment connection to the control board terminals. Control board connectors shall be of the following cross sectional area.
Control board 0,5 mm
2
1,5 mm
2
2,5 mm
2
MiniMCB X1, X2, X3, X4, X5, X6, X7 X9, X13, X14, X15, X16 X10, X11, X12, X17
MiniEX1 X19, X20, X21, X23 - -
Power supply - - Xp1
Automation E zone, connector Xp1 general power connection to the unit ~1/230 VAC.