4
Smarty 4X V
www.salda.lt
Smarty 4X V are residential air handling unit with a high efficiency (up to
90 %
) counter flow heat exchanger. The unit provides ventilation in the home
and takes the heat from the exhausted air. AHU complies with ErP 2018 and Passivhaus requirements. The unit is operated by a separate remote
control panel or though separate MB-Gateway by PC. Remote control panel and MB-Gateway are optional and not included in standard package.
Control functions depend on selected control board type: MiniMCB or MiniMCB basic.
Smarty 4X V operates within the limits of the airflow diagrams and is suitable for indoor operation only. Required ambient temperatures must be from
+5
o
C to +40
o
C. For the cold climate zones (air temperatures below -5
o
C), integrated or optional pre-heater is required.
• Do not use the unit for purposes other than its’ intended.
• Do not disassemble or modify the unit in any way which may lead to mechanical failure or injury.
• Use special clothing and be careful while performing maintenance and repair jobs – the unit’s and its components’ edges may be sharp and cutting.
• Do not wear loose clothing that could be entangled in to operating unit.
• Do not place fingers or other foreign objects through inlet or exhaust guards or into connected duct. If a foreign object enters the unit, immediately
disconnect power source. Before removing object, make sure that any mechanical motion has stopped, the heater has cooled down and the restart is
not possible.
• Do not connect to any other power source than indicated on the model label.
• Do not place or operate unit on unsteady surfaces and mounting frames.
• Mount the unit firmly to ensure safe operating.
• Never use this unit in any explosive or aggressive elements containing environment.
• Do not use the unit if external connections are broken or damaged. If there are any defects, stop operating the unit and replace the damaged parts im
-
mediately. That can be performed only by qualified electrician.
• Do not use water or another liquid to clean electrical parts or connections.
• If you notice water on electrical parts or connections, stop operating the unit.
Standard package (without optional accessories) includes:
1. Key - 1 pc.
2. Sealing tape FIX-PV 6x20
3. Suspension bracket - 1 pc.
4. Condensate outlet pipe G3/8 - 1 pc.
1
2
3
4
