14
| EN
RIRS 1200-5500 H EKO 3.0 v2021.1
W
+RUL]RQWDOÀRRUPRXQWLQJSRVLWLRQVRQÀRRU: PP
5.5.1. UNIT PLACING AND MOUNTING POSITIONING REQUIREMENTS
L
1,5xL
H
Min. distance to open the door - 1,5xL; Min. distance to open the control box door - H > 400 mm.
5.5.2. FLOOR MOUNTING
• The installation should be performed having positioned the units in horizontal direction only.
• Install the supporting legs.
• The units are assembled from separate sections.
•
7KH\PXVWEHDGMXVWHGZLWKRXWDJUDGLHQW
•
/HDYHVSDFHLQIURQW[/VRWKDWLWZRXOGEHVXႈFLHQWWRRSHQWKHGRRUVDQGWRUHPRYHRULQVWDOODUHTXLUHGFRPSRQHQW
Figure 5.5.2.1. Floor mounting
5.6. CONNECTION OF THE AIR DUCT
•
7KHFRQQHFWHGDLUGXFWVPXVWQRWEHEHQWDQGKDYHVHSDUDWH¿[LQJ
•
0DNHVXUHWKDWWKHIDQVFDQQRWEHDFFHVVHGWKURXJKDLUGXFWKHDGV2WKHUZLVHSURWHFWLYHJULGVKRXOGEHLQVWDOOHG<RXPD\FKRRVHWKHJULG
IURPWKHUDQJHRISURGXFWVSURYLGHGLQRXUZHEVLWH
•
'RQRWUHGXFHWKHGLDPHWHURIWKHSLSLQJQHDUDLULQOHWRUH[KDXVWGXFWV,I\RXZDQWWRUHGXFHWKHDLUÀRZVSHHGLQWKHV\VWHPGURSRISUHVVXUH
and noise level, you can increase the diameter.
• In order to reduce the level of the noise in the air supply system, install dampers (see the chapter on air supply system installation).
•
,QRUGHUWRUHGXFHDLUORVVLQWKHV\VWHPWKHDLUGXFWVDQGSUR¿OHFRPSRQHQWVVKRXOGEHRIFODVV&DQGKLJKHU7KHFDWDORJRQWKHDERYH
PHQWLRQHGLWHPVFDQEHIRXQGLQRXUZHEVLWH
• External air and exhaust system piping should be isolated in order to prevent heat loss and condensation.
•
0DLQWDLQLQJWKHGLVWDQFHRIXSWRPHWHUVEHWZHHQDLULQWDNHDQGDLUH[KDXVWGXFWVLVUHFRPPHQGHG$LUVXSSO\LQJV\VWHPVKRXOGEHLQVWDOOHG
DZD\IURPSRWHQWLDODLUSROOXWLRQVRXUFHV
• When installing air ducts next to the ventilation equipment, brackets must be used. They suppress vibration and assure secure installation of the
