1
B
B
A
A
Leveler Foot
Hex Nut
Washer
90
O
A
.
Connect Post
Screw foot with metal washer through bottom
shelf and onto the end of each extruded post.
Place the 17.75” Post front and center of unit.
Hand tighten fully and use wrench to tighten
nut onto underside of shelf.
C
.
Post Cover
Press post cover onto 8.5” center
post to protect the center shelf.
B
.
Square Post
Square the post to the bottom shelf.
Connect Posts to Bottom Shelf
WARNING:
Tighten by screwing the leveler foot NOT the post.
2
Add Shelf Pegs & Door Hinges
!
!
C
.
Heavy Duty Bracket
The heavy duty brackets will be used
to supoort the double-width shelf.
B
.
Door Hinges & Shelf Pegs
1.
Slide the bottom hinge plate through
the front post channels. (Doors can be
either left or right side opening.)
2.
Insert shelf peg into each post in
quantities indicated.
3.
Slide top hinge plate through front
post channels.
A
.
Group Shelf Pegs
There are two varieties of shelf pegs (A and B).
They are designed to cradle the shelf in place.
Refer to drawing.
A B
Doc No. 501-092/v6.18 345 -2 of 4
