Surface Hub Battery Storage Case
501-738 v11.21 page 7 of 8
LIMITED WARRANTY FOR COMMERCIAL VIDEO DISPLAY STANDS AND MOUNTS
Salamander is proud to stand behind our products with industry-leading warranties. Should you ever encounter any problem with your
Salamander product, let us know. We are here to make it right. 1.800.535.5659 - 860.761.9500
Full warranty including limitations and warranty claim information may be found at
www.salamanderdesigns.com/commercial/warranty
5.
Install Cables and Storage Case –
Run Cables Through Stand
Remove the Upper Rear Panel by first removing
the two 1/4-20 x 1/2” screws and then tipping
the Panel back enough to allow lifting the Panel
off of the two Upper Rear Panel Studs.
Next run wires thru the oval cutout behind the
display and the grommeted hole in Upper Rear
Panel and replace the Upper Rear Panel.
Plug in the AC Power Cord, then the cables
from the stand and reinstall Backpack with
battery and resecure with the 10-32 fasteners.
1/4-20 x 1/2”
SCREW (2x)
WIRE
PATH
UPPER REAR PANEL
UPPER REAR PANEL STUDS
5.
Secure Cables
Use the supplied hook and loop straps to
manage wiring inside and to attach power cord
from the battery when not charging. Use these
locations to secure the straps and wiring.
Summary of Contents for FPSA/MSB
Page 8: ......
