Salamander Designs - Fixed Height Mobile Display Stands
501-695 [4.20] page 8 of 21
Attach Display to Stand
Loosely install two “H” Button Head Screws to the Display Brackets to roughly
half the length of the screw body. These two screws will temporarily support
the Display on the Stand. Note: There are six available Display height positions
on the Stand. Locating the two screws in the Display Bracket’s top holes (as
shown) will work for the top four Display height positions. For the remaining
bottom two Display height positions, install these two locating screws in the
middle two holes in the Display Bracket.
Use middle hole locations for
two lowest display heights.
Leave 1/4" of screw body exposed.
FPS2_FH Instructions 4-9-20 - Attach Display to Stand
