37
• Occasionally, you may find that certain characters appear incorrectly or not at all. This is mainly affected on the special or accented characters and not
the fault of the device.
• THE USB SOCKET IS NOT USEABLE FOR CHARGING, IT IS FORBIDDEN TO CONNECT MOBILE DEVICE TO IT! IN THIS CASE THE RADIO’S
DISPLAY GOES OFF, THE DEVICE MIGHT SWITCH OFF DUE TO OVERLOAD OR MIGHT GET DEFECTIVE!
USING WIRELESS BT FUNCTIONS
The device can be paired with other equipment which is communicating by
BT
protocol, within maximum 5-10 meters operation range. After that, music
which is played with mobile phone, tablet, notebook and other similar device is audible amplified. In case of incoming call, it is possible to answer call,
make the call hands-free and end call, without touching the phone. Car radio has built-in microphone and wire-connectable external microphone to
be used for phone calls. Place the wire of the microphone hidden behind the dashboard and the plastic cover behind the dashboard and place the
microphone nearby your mouth close to the awning or column “A”. With this, your talking partner can hear you in even better sound quality. Make sure
the windows are closed during call, as the trip noise significantly impedes the clarity of the speech.
The following extra functions are available: the switched off – but previously already paired– radio switches on and changes into
BT
mode, if there is an
incoming call. The caller’s number is shown on the display. By handling the car radio, it is possible to reject a call (
MOD
(1.)), answer a call (
BAND
(10.)),
end a call (
MOD
(1.)), start a call to the last called number. Press the
BAND
(10.) button to this last. During a call, you can start a private conversation
by pressing the
BAND
(10.) button again. In this case, the radio speaker will be muted and you will only be able to hear the conversation on the phone.
Search for the nearby BT devices to be paired, including this car radio in the way it is written in its instruction manual. Connect the two devices together.
If it requires password, enter the following: 0000 or 8888. After that, you can hear the phone conversation or the music played on the phone from the car
speakers. In case of successful connection, a small symbol on the top right of the screen indicates the presence of a wireless connection.
-
Start a call to the last number: in the case of a dual SIM card phone, depending on the setting, you may be required to confirm the call on the phone.
This can be avoided by adjusting the phone properly (depending on the type).
-
Wireless music playback: the music player application started running on your phone can be remotely controlled from the radio’s play and stepper
buttons
Start playing with the music player of mobile phone or other similar device and music is audible through the car speakers. In case of incoming calls, you
can answer cancel with the radio’s
BAND
(10.) button or with
MOD
(1.) button you can reject the call; while music playback is paused.
• One radio can be paired with one BT device at the same time. Actual operation range depends on the other device and environmental conditions (e.g. 5 m)
• Volume and sound quality of BT connection is affected by the audio settings of connected mobile phone.
• Occasionally, you may find that certain characters appear incorrectly or not at all. This is mainly affected on the special or accented characters and not
the fault of the device.
AUX IN – STEREO SOUND INPUT
With the help of a stereo plug with 3,5 mm diameter, you can connect such external device to the
AUX
socket, located on the front panel, which has
earphone/audio output. You can listen to this portable device through the speakers of the car in high sound quality, if you select with
MOD
button the
AUX
operational mode. Connectable devices with wire: e.g.: mobile phone, multimedia player, CD/DVD player, navigation…
• It is important to have proper settings of playback device to achieve high sound quality.
• Purchasing of external adapter may needed to connect such devices which have audio output different from 3,5 mm diameter.
• For further information, check the instruction manual of device to be connected.
Connecting external amplifier and active subwoofer
The 4xRCA stereo audio output is located on the back of the unit. The white and red RCA sockets are the outputs of the left and right audio channels. Ensure
that you connect an external amplifier or an active subwoofer with a low level input (LINE IN). This way you can improve the volume and sound quality.
Displaying and setting the clock
When the device is switched on, pressing
CLK
(5.) will display the current time for a few seconds. To adjust the clock, press and hold this button until
the display starts flashing. Then set the clock with the rotary knob and the minutes after the knob is pressed. Wait for 8 seconds to automatically adjust
the setting or press
CLK
button…
Resetting the unit
After each event when the power supply is interrupted or the device (including its display) is functioning abnormally, it is necessary to delete the micro
-
processor data. To do this, push the
RST
button on the front panel for 3 seconds with a thin, pointed object (e.g. clip). The unit switches off and reset to
its factory default. The custom user settings must be done again. This operation is required after installation, even before the first power-up, and when
the battery is replaced in the vehicle.
Remote control functions
In order to use the remote control, please remove the insulating film extending from the battery compartment, if the product is equipped with one. If
operation becomes unstable or the range decreases, please replace the battery with a new one: CR 2025; 3 V button cell.
• When using the remote control, aim it toward the unit’s display from a maximum distance of 2 meters!
• In order to replace the battery, turn the remote control facing the buttons down then pull out the battery tray with the battery. Make sure the positive
terminal of the inserted battery faces upward. Follow the directions on the rear side of the remote control!
• WARNING! IMPROPER BATTERY REPLACEMENT CAN CAUSE RISK OF EXPLOSION! BATTERY MAY BE REPLACED WITH SAME OR REPLA
-
CING TYPE ONE! DO NOT EXPOSE THE BATTERY TO DIRECT HEAT AND SUNSHINE AND DO NOT THROW IT TO FIRE! IF THERE IS SOME
LIQUID FLOWN OUT FROM THE BATTERY, TAKE A PROTECTIVE GLOVE AND CLEAN THE BATTERY HOLDER WITH A DRY CLOTH!
KEEP THE BATTERY OUT OF REACH OF CHILDREN! IT IS FORBIDDEN TO OPEN, BURN, SHORT CIRCUIT AND CHARGE THE BATTERY!
RISK OF EXPLOSION!
• THIS PRODUCT CONTAINS BUTTON CELL. BATTERY MUST NOT BEEN SWALLOWED, RISK OF CHEMICAL BURN! IN CASE OF SWAL
-
LOWING, IT WILL CAUSE STRONG INTERNAL BURN AND CAN LEAD TO DEATH! KEEP THE NEW AND USED BATTERIES OUT OF REACH
OF CHILDREN! IF THE COVER OF THE BATTERY HOLDER CANNOT BE CLOSED SAFELY, DO NOT USE THE PRODUCT AND KEEP OUT OF
REACH OF CHILDREN. IF YOU THINK THE BATTERY HAS BEEN SWALLOWED OR GOT INTO ANY OF BODY PART, CONSULT A DOCTOR
IMMEDIATELY!