SAL Nationwide Pty Ltd 40 Biloela Street Ltd, Villawood NSW 2163 ABN 45 144 501 020
Copyright SAL V4 MAR/2018 |
Quickly press the button of the STC/BT 4 times within 30 seconds. When the LED indicator of the STC/BT flashes twice and
then remains lit for 2 seconds, pairing is successful. NOTE: If the paired PIXIE device changes HOME setup in the PIXIE app
or reset to factory, the pairing process will need to be repeated
PIXIE App settings:
Step 1: Open the SAL PIXIE App.
Step 2: Ensure PIXIE devices are added into PIXIE app
Step 3
: Go to function “Timer”,
press
“Timer Control
Configuration
”
Step 4: Follow the guide in the app, choose the target PIXIE device or group, set up delay time and status when turn on,
then start pairing
Step 5: Quickly press the button of the STC/BT 4 times to finalize the configuration
9
. Warranty
In accordance with SAL
’s standard terms and conditions of sale, SAL warrant this product to be free from defects in
materials and or workmanship for a period as stated below for goods not subject to incorrect installation, maintenance,
operation, mishandling, environmental, unauthorised modifications or electrical operating conditions outside the
nominated product specification as detailed in these installation instructions.
The benefits to you given by this warranty are in addition to other rights and remedies you have under law. Our goods
come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Warranty term
–
Twelve (12) months from date of purchase.
How to make a claim?
Step # 1
–
Within 30 days of the fault discovery, please contact the original place of the SAL product purchase during
standard (local) business hours, with the following information
(a)
proof of purchase
(b)
description and quantity of the
claimed fault
(c)
address of installation.
(d)
operating hours of the product.
Step # 2
–
It is then the responsibility of the original place of product purchase to report the matter to SAL aftersales;
NSW | ACT
–
SAL Pty Ltd 40 Biloela Street Villawood NSW 2163
| P # 02 9723 3099
QLD
–
SAL Pty Ltd 36 Whitelaw Place Richlands QLD 4077
| P # 07 3879 5999
VICT | TAS | SA | NT
–
SAL Pty Ltd 46-48 Keys Road Moorabbin Victoria 3189 | P # 03 9532 3168
WA
–
SAL Pty Ltd 29 Beringarra Av Malaga WA 6090
| P # 08 9248 7458
Step # 3
- Upon review of your claim and if the product is required to be returned to SAL for technical evaluation, then
at the owners expense the product must be returned to SAL as per the above nominated locations.
Step # 4
- Pending the evaluation, the claim will be validated resulting in the product being repaired or replaced with
the same or best equivalent product at the discretion of SAL or rejected if the product fault was found to be caused by
conditions beyond the responsibility of SAL warranty obligations. Consideration of installation, product removal, return
freight and or testing fees are not the responsibility of SAL.
