SAKURA SE-MH502B
11
and earthenware
with a bottom diameter of less
than12cm or above 20cm
.
Note:
1. Do not use cookware with jagged edges or a
curved base.
2. Make sure that the base of your pan is smooth,
sits flat against the glass, and is the same size
as the cooking zone. Always centre your pan on
the cooking zone.
3. Always lift pans off the ceramic hob
– do not
slide, or they may scratch the glass.
4. Warning
Do not use aluminum cookware
The product is not warranty by the cause of
Cockroaches, Lizards and other insects that
cause short-circuit, damaging the product.
INSTALLATION
1. 50 mm space should be left around the hole and
there are ventilation outlets (refer to figure 1). The
worktop should be at least 30mm thick and made
of heat resistant material.
-
Glass Size: 730 x 430mm
-
Cut Size: 680 x 380mm
2. It is essential that the hob is well ventilated and
that the air intake and exit are not blocked.
3. Make sure the hob is correctly installed as shown
in Figure 2.
POWER CONNECTION
The socket should be connected in compliance with
the relevant standard to a single pole circuit breaker.
The connection method is simulated in Diagram 3:
