background image

INSTALLER'S AND OWNER'S MANUAL

2

Installer’s & Owner’s Manual

Table of Contents

Precautions  ...............................................................................

1

1. Intended Application  ..............................................................

2

2. Registrations  .........................................................................

2

3. Specifications  ........................................................................

3

4. Unit Assembly  ........................................................................

3

4.1 Installing Feet  ....................................................................

3

4.2 Attaching Drain Hose  .......................................................... 3

5. Installation  .............................................................................

3

5.1 Location  .............................................................................

3

5.2 Electrical Requirements  ..................................................... 4
5.3 Condensate (Water) Removal  ............................................. 4

6. Operation  ...............................................................................

4

6.1 Humidity Control Adjustment  .............................................. 4
6.2 Defrost Cycle  .....................................................................

4

6.3 Blower (Fan) Switch  ........................................................... 4

7. Maintenance  ..........................................................................

5

7.1 Air Filter  .............................................................................

5

7.2 Cleaning and Replacement  ................................................ 5
7.3 Removing Filters  ................................................................

5

7.4 Installing Filters  ..................................................................

5

8. Service  ..................................................................................

5

8.1 Technical Description  ......................................................... 5
8.2 Troubleshooting  .................................................................

6

9. Accessory/Replacement Parts  ................................................ 6
Condensate Pump Kit .................................................................

7

Duct Kit Assembly .......................................................................

9

Warranty  .................................................................................. 11 

Precautions

• Do not operate the unit with a cut or frayed power cord.

•  Do not unplug the unit by pulling on the cord. Grasp the plug 

firmly and pull it out of the wall socket or power receptacle.

• Always use a grounded outlet.

• Never operate electrical equipment near or in standing water.

• Do not stick your fingers or other objects through the safety grills.

•  Do not restrict airflow into or out of the unit. This may cause the 

unit to overheat.

• Unit should never be serviced or cleaned while it is plugged in.

• Do not sit or stand on the unit or use as a shelf or table.

•  Before leavingSAKURA Dry-Boy unattended, ensure children 

do not have access to the equipment. Do not allow children to 
play with or near the unit or in its air flow.

• SAKURA Dry-Boy is designed to be installed indoors only.

Read the installation, operation and maintenance instructions 
carefully before installing and using this unit. Proper adherence to 
these instructions is essential to obtain maximum benefit from your 
SAKURA Dry-Boy dehumidifier.

Read and Save These Instructions

 WARNING!

— This symbol means important 

instructions. Failure to heed them can result in serious 
injury or death.

 CAUTION!

— This symbol means important 

instructions. Failure to heed them can result in injury or 
material property damage.

1. Intended Application

SAKURA Dry-Boy is intended for installation in crawl spaces 
or basements that experience short or long-term high humidity 
conditions; however, the attractively designed unit can be placed in 
almost any residential setting where dehumidification is desired. Use 
in non-residential applications and pool areas will void warranty.

SAKURA Dry-Boy is designed to operate in temperatures 
between 56° and 95°F. Temperatures outside of these ranges may 
affect dehumidifier performance.

In order to efficiently control the humidity levels, the area in which the 
dehumidifier is to be placed must be free of water intrusion or excessive 
fresh (outside) air infiltration. Before installing SAKURA Dry-Boy
water intrusion and air infiltration problems should be addressed.

3. Specifications
Model:

SDB-45

Blower:

240 CFM @ 0.0" WG

Power:

700 watts @ 80°F and 60% RH

Supply Voltage:

115 volt – 1phase – 60 Hz

Current Draw:

5.9 Amps

Energy Factor:

2.60 L/kWh

Operating Temp.:

45°F Min., 95°F Max.

Sized for:

2200 Sq. Ft. - Typical

Miniumum Performance at 80°F and 60% RH
Water Removal: 

90 Pints/Day

Efficiency:

5.5 Pints/kWh

Air Filter: 

MERV-11

Efficiency: 

Standard 65% Efficient, ASHRAE Dust Spot Test

Size:

Size: 12" x 12" x 1"

Power Cord:

9', 110-120 VAC, Ground

Drain Connection:

5/8" hose barb or 3/4" FPT

Drain Hose: 

5/8 " ID x 8' Direct Gravity Drain Hose

Dimensions

Unit

with Duct Kit:

Shipping

Width:

14-1/2 "

14-1/2 "

22"

Height:

19" w/o feet

22-1/4 " w/o feet

25"

Depth:

33"   

40-3/8 "

39"

Weight:

71 lbs

78-1/2 lbs

※ 

50 Hz version is available upon request.

Summary of Contents for Dry-Boy SDB-45











Reviews: