1
1. About the user manual
1-1 Purpose
This manual describes the assembly, installation, operation and troubleshooting of the energy storage system.
Please read this manual carefully before installation and operation, and keep this manual for future reference.
1-2 Range
This manual provides safety guidelines and installation guidelines as well as installation tool specifications and
connection cable specifications.
2.Safety Guidelines
WARNING:
This manual contains important safety and operating instructions, read and save this manual
for future reference.
1). Before using this product, please read all instructions and warnings signs on the case of this product, as well as
the battery connection instructions and all relevant sections in this manual.
2). Do not open the case of this product without authorization. If you need maintenance or repair, take it to a
professional or qualified service center. Improper reassembly may result in electric shock or fire.
3). To reduce risk of electric shock, disconnect all wires before attempting any maintenance or cleaning. Turning off
the unit will not reduce this risk.
4).
Caution:
Only qualified personnel can install this energy storage system.
5). For optimum operation of this inverter, please follow required specification to select appropriate cable size. It is
very important to correctly operate this system.
6). Be very cautious when working with metal tools on or around the energy storage system. Dropping a tool may
cause a spark or short circuit in batteries or other electrical parts, even cause an explosion.
7). Please strictly follow installation procedure when you want to disconnect AC or DC terminals. Please refer to
"Installation" section of this manual for the details.
8). Never cause AC input/output and DC input short circuited. Do not connect to batteries or solar panel when DC
input short circuits.
9). Caution: Only qualified personnel are allowed to repair or test this products. If still problems after
troubleshooting, please send the product back to the local dealer or service center for service.
3. Introduction
This energy storage system built inside with MPPT solar charger, hybrid solar inverter, AC charger, mode switch,
lithium battery pack, LED display and remote WIFI monitor. The user can operate and set on the APP.
4. Product Features
✮
Select the work mode as grid-tied or off grid.
✮
LED display working mode switch.
✮
SOC of energy storage capacity displayed via RGB lights.
✮
o
verload, over temperature, short circuit protection.
✮
Remote WIFI function, can check lots of the system’s data such as working status, solar power generation, power
consumption,metering power, battery SOC, battery cycle times, voltage of each battery cells through the mobile
phone APP. At the same time user can turn on or turn off through the mobile phone APP, whether it is in timing
mode or smart mode.
✮
It can be used for timing mains charging and timing grid-tied or discharge.
