2. After loosening the Pencil Holder Angle
Adjustment Knob by turning it counterclockwise,
turn the Deep hole pencil holder (NO.1) to adjust
it to the level of the Aluminum alloy bracket
(NO.8), and turn the Pencil Holder Angle
Adjustment Knob clockwise to lock it.
Method 2: Use Compass Pins as the center
of the circle
1. Rotate the Compass Pins
counterclockwise, remove it from the
product, insert it into the round hole
Round hole
4. Insert the Removable deep hole pencil (NO.2)
into the Deep hole pencil holder (NO.1) vertically,
and use the pencil to drive the product to rotate
around the Compass Pins for a circle to draw a
circle.
3. Loosen the Bracket Holding Knob by turning it
counterclockwise, move the aluminum alloy
bracket (NO.8) back and forth in the horizontal
direction to adjust the radius of the circle, or
rotate the aluminum alloy bracket (NO.8) around
the axis by 180° and then move back and forth in
the horizontal direction. Move to adjust the radius
size of the circle.
1. Pencils need to use 2.8mm refills.
Removable deep hole pencil
on the head of the product, and press the
Compass Pins insertion plane with your fingers.
180°
2. Rotate the end of the pencil
counterclockwise, you can get a
cutting tool, use the trimming tip
of the pencil.
3. With the sharp corner of the product head as
the center, rotate the product to draw a circle on
the plane.
Blade Attachment
Be aware that the tip of the product is very
sharp; careless handling may result in injury.
Blade Attachment
Be aware that the tip of the product is very
sharp; careless handling may result in injury.
3
