- 7 -
10. Congratulations!! You have successfully installed the “PhoTags
Express” software, the “PhoTags WebCam Express” and the
Camera driver.
Section Four - Taking Photos
NOTE: TO ACHIEVE THE MOST CLARITY, THE OPTIMAL DISTANCE
BETWEEN THE CAMERA AND THE SUBJECT IS “5” FEET.
Please ensure that the battery is properly charged before taking photos.
1. Press the function button to turn on the camera - the LCD at the back of the
camera will light up.
2. Use the viewfinder to frame your shot.
3. Hold the camera steady, and press the shutter button.
4. You will hear a beep when you have taken a photo, and the camera is ready to
shoot again.
5. If you press the shutter button when the camera is full, the camera will emit
continuous beeps to warn you.
Tips:
1. When taking photos, hold your camera steady.
2. Low lighting will reduce the quality of your picture.
Section Five - Camera Functions
If the camera is in energy save mode, press the function button once to switch to
working mode.
Turn Camera Off
1. Press the Function button to select “
” shown on LCD display.
2. Press the shutter button within 5 seconds to turn camera off.
Auto-Shoot Mode
1. Press the Function button to select “
” shown on LCD display.
2. Press the shutter button within 5 seconds to activate the 10 second timer.
3. The camera will beep once per second. After 10 seconds the photo will be taken.
Continuous Shoot Mode
