Sakar 15490, Owner'S Manual, Page: 5 / 31

Preparing Your Photo Frame for Use
Battery Installation
Your Photo Frame requires four AAA alkaline batteries, which must be inserted as follows:
1. Slide the battery compartment open on the back of the photo frame in the direction
indicated by the arrow.
2. Insert the batteries in accordance with the polarity (+/-) shown inside the compartment.
3. Close the battery compartment.
When the battery power is low, the LCD display will show the
red
icon and flash. When a flashing “ Low Battery ”
message appears the device will automatically switch off after
15 seconds. You need to change the batteries in order to
continue using the Photo Frame. You also can draw power
from the power adaptor by USB cable.
Note: If you do not intend to use your Photo Frame
for an extended period, remove the batteries to avoid
leakage and corrosion.
Noted: The photo frame can not power off automatically
on Slide Show Mode/Clock Mode/System Set up.
- 5 -