̶
10
̶
3. Inspection before operation
Be sure to check and refill oil with the rammer shoe held level.
Run the engine for a while after oil has refilled then check the oil level
again at approx. 3 to 5 minutes after engine has been stopped. If oil has
been filled sore than the specified, malfunction results. Be sure to wipe it
off when over-filled.
If an oil other than the specified is used, service life of engine is likely to
be shortened.
•
•
•
IMPORTANT
Remove the fill plug located in the lower
cylinder case with the rammer shoe held
level and check that the oil is filled up to the
mouth of the port.
If it is found insufficient, supply oil to the
extent that it comes full to mouth of the
port.
Drain plug
3.3. Checking oil in the rammer cylinder
