manualshive.com logo in svg

SAJ Suntrio Plus 15K, User Manual

Share
Download
SAJ Suntrio Plus 15K User Manual Download Page 43

Suntrio Plus Series

- 42 -

6.3 Monitoring Operation

The equipment is equipped with a RS232 and a RS485 interface, and the RS232
interface can be connected to Wi-Fi module, Ethernet module, GPRS module
which can be used in the monitoring of the operation status.

①

By connecting the Internet through Wi-Fi module and uploading the inverter

data to the server, users can monitor the operational information of the inverter by
web version web portal or mobile APP (please download the mobile APP from
SAJ official website) remotely.

②

By connecting the Internet through Ethernet module and uploading the inverter

data to the server, users can monitor the operational information of the inverter by
web version web portal or mobile APP (please download the mobile APP from
SAJ official website) remotely.

③

By connecting the Internet through GPRS module and uploading inverter data to

the server, users can monitor the operational information of the inverter by web
version web portal or mobile APP (please download the mobile APP from SAJ
official website) remotely.

Users can apply a Modbus protocol through RS485 together with a SAJ Logger to
monitor the data of the inverter. For detailed operation please refer to the SAJ
Logger User Manual.

Summary of Contents for Suntrio Plus 15K

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands