Suntrio Plus Series
- 33 -
6.2 First Run Setup
6.2.1 Set the Country
When the solar inverter begins to run for the first time, please configure the time of
usage, and the inverter LCD will display as below:
Figure 6.2 Set the Time
Users can press Up, Down, Left, Right and ENT buttons to set local time and
confirm the selection.Then the inverter will display the interface for country
selection as shown in Figure 6.3:
Figure 6.3 Set The Country
Please press the "ENT" button, LCD will show the countries for option. Users can
press "
" or" " to select the correct country and press "ENT" button to confirm
the selection.
Note:
The configuration of the country of usage must be set before inverter starts
to run for its first time, otherwise the inverter will not be on-gird.If users can not
locate the corresponding country, please abort the setting and contact the after
sales for confirmation.
