R5
Series
- 50 -
Board Master
50
Interior communication Error Slave
51/52/53
L1/L2/L3 Voltage Consistency Error Slave
54/55/56
L1/L2/L3 Frequency Consistency Error Slave
57
GFCI Consistency Error Slave
58/59/60
L1/L2/L3 DCI Consistency Error Slave
61/63/65
L1/L2/L3 Overvoltage Slave
62/64/66
L1/L2/L3 Under Voltage Slave
67/69/71
L1/L2/L3 Over Frequency Slave
68/70/72
L1/L2/L3 Under Frequency Slave
73/74/75
L1/L2/L3
Grid Lost Error
Slave
76/77/80
PV1 /PV2/PV3 Overvoltage Slave
78/79/82
PV1/PV2/PV3 Overcurrent Slave
81
Loss of Communication between Display Panel and
Control
Board Master
83
Grounding Detection Error Master
84
PV Input Error Master
86
DRM0 Error Master
Table 7.1 Error Code
General troubleshooting methods for inverter are as follows:
Fault Information
Troubleshooting
Relay Error
If this error occurs frequently, please contact your distributor
or call SAJ technical support.
Storer Error
If this error occurs frequently, please contact your distributor
or call SAJ technical support.
High Temperature
Error
Check whether the radiator is blocked, whether the inverter is
in too high or too low temperature, if the above mentioned is
in normal, please contact your distributor or call SAJ
technical support.
GFCI Device Error
If this error occurs frequently, please contact your distributor
or call SAJ technical support.
DCI Device Error
If this error occurs frequently, please contact your distributor
or call SAJ technical support.
