B1
Series
- 12 -
Figure 3.4 Installation position
3.3 Mounting Procedure
3.3.1 Positioning the drilled holes for bracket
The battery B1 uses free-standing installation and its position is determined by the
drilled holes of bracket
,
Unit: mm.
Figure 3.5 Bracket for B1-5.1-48 (Slave machine)
Make sure that the wall is capable of mounting screws and supporting the weight
of the battery pack before installation. Mark the location of bracket's holes on the
wall and drill the holes. Then use a rubber hammer to drive screws into the holes.
Figure 3.6 Bracket for B1-5.1-48 (Slave Machine)
AS1-3KS-5.1 is a master machine and B1-5.1-48 is a slave machine. To ensure the
Summary of Contents for B1 Series
Page 1: ...B1 Series 1...
Page 28: ...B1 Series 27...