GB
27
THE OPERATING COMMON KNOWLEDGE
Before operating it each time, you must make the electric water heater fully filled first.
After that, it can permit you to put through the power source.
When no tap water provides, you mustn’t use the water in the tank of electric water
heater.
For the cold and frozen regions in winter, when not using it for a longer period of time,
you should make the water in the tank of electric water heater emptily occupy. The
emptiness-making methods can be seen the “Security Characteristics” in this instruc-
tions brochure.
When the electric water-heater is in normal work, the leakage pressed mouth of the se-
curity valve may exist the water drops to drip out. This belongs to the normal conditions.
Take care not to block this leakage pressed exit. You can use the plastic pipes to lead
flowing. However, you must keep it through with atmosphere.
The power-source outlet must have the reliable ground connections for the use.
Double-level Temperature-limiting protection Switch: This electric water heater pro-
cesses one required artifice position-resetting double-level temperature-limiting pro-
tection switch. Enabling to automatically cut off the power sources when the electric
water heater is over-heat by the accidents or the water temperature is hype-high. Guar-
anteeing the two poles are cut off. That ensures to be safe.
The Position-resetting Methods of the Double-Position Temperature-limiting Device:
1) Pull down the power-source plug.
2) Make the plastic lid on the bottom (right side of horizontal style) the electric water-heat-
er to be opened with tools.
3) Press down the white-color position resetting button on the two positional temperature
limiter.
4) Close the plastic cover.
5) Slightly reduce the temperature-setting value.
6) Reinsert the plug of the power source and put through the power source. If the
above-mentioned operations can’t still let the whole unit put through the power and
work normally, which indicates the water temperature in the tank is still over-high. Please
open the water exiting valve and pour out the heat water for several minutes, then re-
peat the above mentioned procedures after waiting the water temperature reduces.
THE PRODUCT’S FEATURES
Unique Profile: New tide personalized design, leading the market’s new tides.
The sapphire golden silicon tank: Rust-proof, Erosion-proof, Anti-leakage, More ad-
vanced with high efficiencies & longer longevity.
High efficiencies energy saving & temperature maintaining heat isolation layer: Adopt-
ing the thickended non-fluorine amine-gathering resin whole body’s bubble-making
heater isolation layers, good temperature-keeping performance. Reducing the heat loss
with the maximum degrees. Under the electricity cutting off and the temperature keep-
ing conditions, still exiting the hot water for provisions within 48 hours.
Rated power heating: 2000W
TMS158.indd 27
2018/3/23 10:09:24