KNOW YOUR IRON:
A
B
C
D
E
F
H
G
350mL
I
J K
L
M
N
O
P
2020-2400W / 220-240V~ / 50/60Hz
HOW TO USE
NOTE
Remove any labels, stickers or protective foil that may be attached to the body or soleplate of the iron
before first use.
The iron may give off some smoke and emit an odor
when you first use. This will cease after a short
while. It is safe and will hot harm the performance of the iron.
FILLING WITH WATER
Remove the mains plug from the wall socket before filling the iron.
Set the steam button to position “0” or “ ” and open the water inlet cover.
Please fill your iron with normal tap water before using for the first time.
Use the water beaker attached to fill clean tap water into water tank until “MAX” filling level.
For refilling, you can also use tap water. However, if the water is very hard it is advisable to use
distilled water.
Replace water inlet cover and dry the spilt water around the enclosure of the appliance.
Do not fill the tank beyond the MAX indication.
Do not put perfume, vinegar, starch, descaling agents, ironing additives chemically descaled water or
other chemicals in the water tank.
SETTING THE TEMPERATURE
Fabric
Temperature control
NYLON/ACRYLIC/ACETATE
●
A. Soleplate
B. Heat isolating plate
C. Water tank
D. Spray nozzle
E..Water inlet cover
F.
Upper cover
G. Steam control knob
H. Spray/Burst button rubber
I.Spray/Burst button
J. Pilot light cover
K.Upper cover rubber
L.Cord sleeve
M. Beake
N. Temperature control knob
O.Rear cover
P.Self-Clean button
