w
.
ss
+
AUTO: AUTOMATIC PROGRAMME
Flashing
): Programmer in automatic position, but not progra-
mmed or ended.
(Light on): Programmer in automatic position and programmed.
No symbol lit, except the clock numbers means that a waiting
time is programmed.
Programmer functions:
24-hour display clock.
Alarm (Maximum 23:59).
Automatic programming (start and end of cooking).
Semi-automatic cooking (only start or only end of cooking).
The timer only works when the appliance is connected to the
electricity supply.
Electronic clock
Immediately after connection (Also after a power cut) THREE
flashing digits will appear on the panel.
To enter the correct time pre simultaneously and AT
THE SAME TIME one of the buttons ó until the correct
time is shown. There is a 5-second acceptance delay during
which no button should be touched.
The speed that the marker changes will noticeably increase
some seconds after beginning to press the buttons
and
Manual cooking
(Without using the programmer)
To use the oven with the help of the programmer, the flashing
«AUTO» indication must be cancelled by pressing the button
If the «AUTO» indicator is not flashing (which means that the
oven is programmed) the programming must be cancelled first
by pressing
and setting the marker to 0.
Automatic cooking.
(Start and end of cooking)
1) Programme the cooking time using
2) Programme the end of the cooking time using
3) Select the temperature and function required using the ther-
mostat and selector knobs.
After these operations, the «AUTO» symbol will appear on the
display, indicating that the oven has been programmed.
Practical example:
We wish to cook for 45 minutes and that the cooking time ends
at 2 p.m.
• Pressing e set 0.45 on the display.
• Pressing we set 14:00 on the display.
After these operation the current time will reappear on the dis-
play as well as the «AUTO» symbol, indicating that our progra-
mming has been understood and memorised.
At 13:15 (14:00 minus 45 minutes), the oven will automatically
start, the symbols
and «AUTO» appearing during cooking.
At 14:00 the cooking will automatically stop and the alarm
will
sound intermittently.
Press
to turn the alarm off.
Semi-automatic cooking
A. Programming the duration of the cooking
Set the chosen cooking time using the button
and set the
duration.
Cooking will start immediately, the symbols «AUTO» and
will
appear on the display. When the programmed time has passed
the cooking will stop and the alarm will sound intermittently.
Turn the alarm off as described above.
B. Programming the end of the cooking
Set the chosen end time for the cooking using the button and
set the end time. Cooking will start immediately and the sym-
bols «AUTO» and
will appear on the display. Cooking will
end at the set time and the alarm will sound intermittently. Turn
it off as indicated above. The state of the programming can be
checked at any time by pressing the corresponding button.
The programming can also be cancelled at any time by pres-
sing
and setting the marker to zero. By then pressing
the oven will be ready for manual operation.
Electronic alarm
The timer function consists solely of an alarm which can be ad-
justed for a maximum period of 23:59. To adjust the time, press
the button
and at the same time (+) or (-) until the desired
time appears. Having made the adjustment, the real time will
reappear next to the symbol
.
The countdown will begin immediately and can be viewed on
the display at any time by simply pressing the button. When
the time has ended, the symbol will disappear and the alarm
will sound intermittently, which may be turned off by pressing
the button
. The alarm does not control any of the oven
functions.
NOTE
• If an error is made it will be indicated via an alarm and the
“AUTO” symbol will flash. Cancel the adjustment by pressing
the button
, and then re-programme to rectify it.
• The alarm that sounds at the end of a programme will continue
for seven minutes unless cancelled by pressing the button
. However, at the end of the seven minutes the “AUTO” symbol
will continue flashing.
• The alarm has three tone positions, low, medium and high.
To adjust the tone, check that the timer is in the manual mode,
then press the button and hold down to hear the tone selected.
On releasing the button , press again and hold down to select
another tine. Repeat the procedure until the required tone is
heard.
WARNING
! a power cut will result in the programmed
functions to be cancelled, including the clock. Once the power
returns three flashing zeros will appear and the oven can be
re-programmed.
Summary of Contents for HORNO
Page 1: ......
