Saito FA-60T, Instruction Manual

Page: 20 / 26

P A R T S L I S T
18
You will note a letter (A, B, C. etc.) stamped on the top of the motor mount. This letter identifies the
production version of your engine. Should you ever need to order a part or have a question pertaining to
your engine, specify this letter along with the engine type. This will allow ease in identifying your engine.
Saito Twin Cylinder Prop Chart
NOTE: All recommendations are based on engines using APC props, Power Master 15%
2-stroke fuel, and Saito SAIP 400S glow plugs.
ENGINE SPORT SCALE
FA-60T
2,000-10,500 rpm
10×6, 10×7
11×5, 11×6, 12×5
11×5, 11×6, 12×4
12×5
FA-90TS
2,000-10,000 rpm
12×8, 13×6, 13×8 13×8, 14×6
FA-100T
2,000-10,500 rpm
12×8, 13×6, 14×6 14×6
FA-182TD
2,000-10,500 rmp
14×12, 14×10,15×10
15×8, 16×6, 16×8
16×6, 16×8, 16×10
18×6
FA-300TL/300TTDP
2,000-5,000 rpm
18×10, 20×8, 20×10
20×12, 22×8, 22×10
20×8, 20×10, 22×8
22×10, 24×8
Propeller Selection
Below you will find a propeller
selection chart. This chart will enable
you to select the best propeller for
initial set-up of your Saito engine.
Remember, it is imperative to balance
each propeller prior to installation onto
your Saito engine.
Failure to do so may cause unwanted
vibration in your aircraft.
NOTE: Observe operating rpm ranges as excessive rpm can result in damage to the engine.