10
Chemical Supply Options
Option 1 – Using the Long Extension Hose
See Figures 2.
Insert the end of the long extension hose through the hose
compression fitting on to the inlet of multi-directional swivel. Next,
screw the hose compression fitting with the bottle cap. Make sure the
connection is secure. And then, place the other end of the hose with a
suction strainer into your container.
Option 2 – Using with a Plastic Soda Bottle
See Figures 3.
To use the sprayer with a soda bottle, just insert the short hose to the
inlet of multi-directional swivel, then put the short hose into the bottle
and screw the bottle into the bottle cap.
Do not use bottles over 2 liters and careful not to over
tighten the bottle.
Sprayer Configurations
Option 1 - Using the adjustable nozzles directly to the outlet of the
gun.
See Figures 4.
1.
Install the brass adapter directly on the outlet of the gun and
tighten securely.
2.
Attach the adjustable nozzles to the brass adapter and ready to use.
3.
Use only the straigth nozzle tip (dispart the straight adjustable
nozzle) to get more concentrated spray pattern.
Option 2 - Using the QC kits directly to the outlet of the gun.
See Figures 5.
1.
Install the brass adapter directly on the outlet of the gun and
tighten securely.
2.
Attach the QC socket to the brass adapter.
3.
Slide back the metal sheath around the QC socket and insert one
of the QC nozzles. Then slide back the metal sheath forward again
until it clicks back in proper place.
Option 3 - Using the short wand.
See Figures 6.
