sageglass.com/resources
STEP 1:
For termination, remove 1/2” of DC wire insulation.
To insert the wires into the terminals use flat
screwdriver to push on terminal clamp.
STEP 2:
Populate wire terminals (1) with 2-Wire Frame Cables, 4-Wire Frame
Cables or 8-Conductor Cables according to wire color code guide (2)
that is on stickers above and below controller.
CONTROL PANEL WIRING - DC CIRCUIT
FIGURE 8: CONTROLLER LABELING
FIGURE 9: TERMINAL CONNECTION
Refer to appropriate row of wire color code guide
depending on the cables that system is equipped
with and follow the color code.
FIGURE 10: CONTROLLER CONNECTION
CONTROLLER NUMBER
LOCATION (i.e. CP1-1)
2
2
1
1
1
1
1
1
1
1
