SAINT-GOBAIN NORTON clipper TR 232 S&L, Operating Instructions Manual

Page: 34 / 73

VERS. 2019.05.17 TR 232_MAN_EN
12
2.5 Statement regarding the vibration emission
Declared value of vibration emission following
EN 12096.
Machine
Model / code
Measured value of vibration
emission at m/s
2
Uncertainty K
m/s
2
Tool used
Model / code
TR232 S:
70184601109
70184601110
70184601111
TR232 L:
70184601103
70184601104
70184601105
<2.5 0.5
Extreme ceram
turbo/Clipper Super
Gres XT

The vibration value is lower and does not exceed 2.5 m /s².

Values determined using the procedure described in the standard EN 12418.

The measurements are made with new machines. Actual values may vary with site conditions, in
terms of:

Materials worked

Wear Machine

Lack of maintenance

Inappropriate tool for application

Tool in poor condition

Unskilled operator

Etc…

The exposure time to vibration is based on the performance of work (related to the adequacy
Machine / Tool / worked material / operator)
When evaluating risks due to hand-arm vibration, you need to take into account effective usage at
rated power of machine during a full day of work; quite often you will realise that effective utilisation
time represents around 50% of overall duration of work. You have to consider, of course, breaks,
water feed
ing, preparation of work, time to move the machine, disk mounting…