23
Air cleaner discharge valve
Empty dust discharge valve 1 by pressing apart
lips of discharge as indicated by arrows.
Clean the discharge slot from time to time.
Remove any caked dirt by pressing together
upper section of valve.
Filter cartridges
Undo the clip fasteners 1.
Take off the hood 2 and remove cartridge 3.
Clean the cartridge, and replace it at least
once a year.
Clean cartridge 3 using compressed air
(max. 5 bar). Blow out from inside to
outside (or in difficult cases, tap out, taking
care not to damage cartridge, or wash
according to ma
nufacturer’s instructions.)
Gaskets on filter cartridge can become
damaged through regular removal and
replacement. Check paper filter (light
showing through) and gaskets for damage.
Replace if necessary.
After five cleaner services or after two years
at latest, replace the safety cartridge 4
(never clean) by undoing the hexagonal nut
5 and removing the cartridge 4.
Install the new cartridge 3, replace hood 2
and do up the clip fasteners 1.
Alternator belts
Slacken off bolts 1, 2 and 3.
Adjust alternator 4 in direction of the arrow
by turning the bolt 3 until correct belt
tension is achieved.
Retighten the bolts 1, 2 and 3.
