G
F
H
E
B
J
C
A
A
18
I
It’s faster to wind while you sew!
Run thread to the bobbin winder from an extra cone
of thread� Simply place the second cone beside the
primary cone and lead the thread up through the same
guides� Follow normal bobbin winding instructions but
do not disengage the clutch�
19
D
E
Scan to watch a video on
how to wind a bobbin�
Winding Bobbins
Disengage the Clutch
To disengage the machine, pull the Posi-Pin
®
Safety Shear (
A
) out of the balance wheel (
B
)� The balance wheel will now
rotate without operating the machine� Push the pin into the hole at the center of the Posi-Pin nut (
C
) to store�
Thread the Bobbin on the Machine
1�
Thread comes off the top of cone (
D
) to the thread stand
arm (
E
)�
2�
Pass thread through a hole in the spool pin (
F
) (most
direct route to bobbin tensioner)�
For home sewing, refer to “NOTE” on p� 15�
3�
Wrap thread around bobbin tensioner (
G
)�
4�
Run under and up through a hole in top of bobbin (
H
)�
Place bobbin on post and push to the right� Hold onto
thread tail briefly and power machine with the clutch
disengaged to wind bobbin� Stop after several rotations
and cut the thread tail off flush with the bobbin side.
5�
Continue winding until the bobbin is full� Then remove the
bobbin from the winder post by pushing the post to the left
and pulling the bobbin off� Cut the thread�
Engage the Clutch
To continue sewing, push the Posi-Pin (
A
) through one of
the holes in the balance wheel (
I
) (any will work)� While
maintaining light pressure on the Posi-Pin, rotate the balance
wheel (
J
) until the Posi-Pin locks into one of the holes in the
bushing that the balance wheel rides on� Push the Posi-Pin
all the way in until the shoulder is flush against the balance
wheel� Rotating the balance wheel will now cause the
machine to function�
CAUTION:
Do not overfill bobbin and force into
bobbin case or the machine will not function correctly�
13 |
Sailrite�com
Ultrafeed
®
LSZ Guidebook
| 14
