10
Installation
IRIDIUM
2.8
Optional SIM card Reader
Only direct accessible on Mk3 units produced from August
16, 2003. On older units the L-Band transceiver must be
dismounted in order to install the SIM card.
This additional SIM card reader can be used as a master
SIM card, thus allowing the crew to place individual cards
in the primary SIM card reader on the front.
The primary SIM card reader on the front has highest
priority and will thus disable the card in the optional card
reader when a card is inserted.
The optional card reader is ideal for Ship Security and
Alert installations, where a permanent SIM card is required.
Remove the lid by removing the 2 umbraco screws. After
inserting the card put the lid back on.
2.9
How to Remove the Finishing Cover
You may need to dismount the satellite transceiver box
from the wall, e.g. in connection with service.
For access to the mounting screws, the finishing cover
can be removed from the satellite transceiver box as
follows:
c
Put a screwdriver into the slot in the printed circuit
board beside the SIM card reader, and press gently
to unhook the plastic spear.
d
While pressing with the screwdriver, lift up the
same side of the finishing cover slightly to loosen it.
e
Repeat this procedure on the other side of the
finishing cover.
f
You can now detach the finishing cover from the
satellite transceiver box by pulling it gently upwards.
0514
c
d
e
f
