28
9.3.1
Placing the Aerial(s)
Aerials should be mounted in a place that is as high and clear as possible - like the “primary aerials” in the illustration below. The horizontal
distance to metal parts must be at least 1m.
When using two aerials, the primary aerial must be placed at a higher level than the channel-70 aerial:
9.4 Options Connection Box
Options connectors
35350
NMEA_IN-
-BAT
+12VDC
FAN_ON
RX_1_SQ
CH_AUX_1
CH_AUX_2
RX_1_AF
N
NMEA_OUT-
DSC_ALARM_ON
X1
14
15
13
12
11
10
X2
9
8
7
6
5
4
1
3
2
To connect a GPS to the VHF transceiver, connect
the GPS signal lines to the options connector
pin_4 () and
pin_5 (NMEA_IN-).
35379B
GPS
H4992
X2
56.111
Alternatively the GPS can be connected directly
to the transceiver by means of a 15-pole high
density D-sub in the same pins as those
mentioned above.
Make sure to use the 15 to 15-pole adaptor
between the transceiver and the 15-pole high
density D-sub.
The two partsare supplied with the radio.
7UDQVFHLYHUXQLW
7ZLVWHG
2SWLRQER[
;
1DPH
SDLU
;;
pin 1
DSC_ALARM_ON
1
pin 2
N1
1
Optional
pin 3
NMEA_OUT-1
1
Optional
pin 4
2
4
pin 5
NMEA_IN-
2
5
pin 6
-BAT_0VDC
3
6
pin 7
+12VDC
3
7
pin 8
FAN_ON
8
pin 9
RX_1_SQ
9
pin 10
CH_AUX_1
10
pin 11
CH_AUX_1
11
pin 12
RX_1_AF
12
pin 13
N.C.
13
pin 14
N.C.
14
pin 15
N.C.
15
Connection Box
Installation - Transceiver Unit
0203
