12
6.8
Function menu
The function menu enables you to set up and check the various
functions of the handset. It also offers facilities to view and change
the functions of the VHF transceiver and of the DSC modem.
6.8.1
To enter the function menu
To set up or view items in the function menu, press
Shift
,
Func
. The
display will read TELEPHONY.
6.8.2
To move around the function menu
1.
Use the
up
and
down arrows
to locate the function – DSC,
GENERAL or SERVICE.
2.
Press the
right arrow
to select the function.
3.
Press and hold the
left arrow
for 1 second to go back to function
selection.
6.8.3
To edit items in the function menu
1.
Use the
up
and
down arrows
(a) to toggle between Y (yes) and
N (no) and (b) to change single numeric values up or down until
the limit is reached.
2.
Use the
right arrow
(a) to select an item and move to the next
and (b) to move a step to the right in an item with more than one
input.
3.
Use the
left arrow
(a) to delete the character to the left of the
cursor and (b) by holding for 1 second to go back to function
selection.
4.
Use the alphanumeric keys to enter data at the cursor position.
6.8.4
To exit the function menu
If you have changed any setting while in the function menu, you
must turn the handset off and then on again for the changes to take
effect. You can exit in one of the following ways:
1.
By pressing
16
to activate channel 16 in VHF mode.
2.
By pressing
Shift, Func
to activate VHF mode on the last
channel you used.
3.
By pressing
Tel DSC
to activate VHF mode on the last channel
you used.
4.
By pressing
RX Log
to enter the DSC RX log menu.
Example
To activate a keyboard beep every time a key is pressed:
1.
Enter the function menu by pressing
Shift
,
Func
. The display
will read TELEPHONY.
2.
Press the
up
or
down
arrow
twice to display GENERAL.
3.
Press the
right arrow
to display ILLUMIN.
4.
Use the
up
or
down
arrow
to locate SOUND.
5.
Press the
right arrow
to display EARPIECE.
6.
Press the
up
or
down
arrow
twice to display KEYBOARD.
7.
Press the
right arrow
to display KB.BLEEP N
8.
Now use the
up
or
down
arrow
to toggle the final Y (Yes) or N
(No) to select.
9.
Finally, press the
right arrow
to re-enter the function menu. To
activate the new setting, turn the handset off and then back on
again.
Operation
0203
