Sailor 6248 VHF, User Manual

Page: 35 / 62

Chapter 2: Operation
Setup 21
2222
Ope
ra
ti
o
n
Channel setup
Parameter Description
Channel Mode
To select the channel table for the primary channel.
Channel tables available:
INT, BI, US , CA, ALT . See also
VHF channel table on page 13.
Bandwidth Selection of the bandwidth for the fixed pre-programmed
channels. This is recommended from Radio Regulations:
Wide : Wide band is 25kHz channel bandwidth (default)
Narrow : Narrow band defines a channel bandwidth of
12.5kHz
In narrow band mode the channel number is displayed as:
• 2xx if the new frequency is between the original
frequency in wideband mode
• 4xx if the new frequency is the same as the original
frequency in wideband mode
INT. Channels You can view the channel
settings. Press the soft key
to advance the channel
numbers.
Bandwidth: WIDE (default) or
NARROW
Tagged for scan: OFF
(default) or ON
For customizing, contact your authorized dealer.
Press the soft key
EXIT to return to CHANNEL SETUP .
BI. Channels As described above.
US. Channels As described above.
CA. Channels As described above.
ALT. Channels For customizing, contact your authorized dealer.
Private Channels For customizing, contact your authorized dealer.
EXIT INT. Channels
10
PORT-PUBLIC
Ch: 1
Rx: 160.6500 MHz
Bandwidth:WIDE
Tagged for scan: OFF
Tx: 156.0500 MHz
www.busse-yachtshop.de | info@busse-yachtshop.de