1. Key and Operation
Power ON/OFF.
ON : Holding press 1 sec OFF : same way about
2sec.
Selecting menu.
Changing display mode.
Stop alarm or select/change items in menu.
(
)
Press cursor to show changeable rod. Press one
more time it is disappeared..
Highlighted cursor. Adjustable by [
▲
][
▼
].
Selecting work, Moving or input data, cursor and
changing depth.
[
◀
◀
◀
◀
][
▶
▶
▶
▶
] checking previous data & Setting position,
Gain, STC.
[
▲
][
▼
] Moving cursor or setting depth range, input
data.
Less 12V, It is flashing LED with alarm.
2. Echo Sounder Screen
①
Ownship Lat/Long : Lat/Long of Ownship position(Present) in
case of being connected by ex. data
②
Temperature : Present temperature measured by
thermometer
(in connected thermometer)
③
Depth Alarm Range : Sounding Alarm & flashing Depth within
range of depth alarm.
④
GAIN : Displaying Gain value in receiver
⑤
STC : Displaying STC value to see the screen
removed
plankton
, bubble etc under
the water about 100m less
⑥
Frequency : The frequency to measure by transducer
(In dual frequency, Displayed by yellow
letter)
⑦
5Min Time Mark : In time mark 15min, Displayed automatic
time mark per 5min. (GPS Lat/Long)
⑧
Depth : Measured depth (set by m(meter) or
ft(feet)
⑨
Menu : Displaying main menu each function
⑩
Time Mark Line : Time Mark Line in red is displayed based
on set time.
3. Auto Gain by soft key
Auto Gain is to set GAIN automatically, Press
then set
USE(
) / CANCEL(
) one after the other. Direction [
▼
],[
▲
] is to
select adjusting bar, [
◀
],[
▶
] is to adjust setting value.
In Auto Gain set, Not available to set GAIN/STC manually.
4. Echo Sounder Set
In order to return previous menu after set value,
Press
.
[S.Speed ] Set The Example is following,
Select
[Echo Sounder]
Quick reference Guide
Example
Select
[Echo Sounder]
①
①
①
①
②
②
②
②
③
③
③
③
④
④
④
④
⑤
⑤
⑤
⑤
⑥
⑥
⑥
⑥
⑦
⑦
⑦
⑦
⑧
⑧
⑧
⑧
⑩
⑩
⑩
⑩
Select
[S.Speed]
Select
[Echo Sounder]
Example
