Sailor 6222 User Manual Download | Manualshive

Page: 4 / 88

background image

Disclaimer

Any responsibility or liability for loss or damage in connection with the use of this
product and the accompanying documentation is disclaimed by Thrane & Thrane. The
information in this manual is provided for information purposes only, is subject to
change without notice and may contain errors or inaccuracies.

Manuals issued by Thrane & Thrane are periodically revised and updated. Anyone
relying on this information should acquire the most current version e.g. from

http://www.thrane.com

or from the distributor

.

Thrane & Thrane is not responsible for the content or accuracy of any translations or
reproductions, in whole or in part, of this manual from any other source.

Copyright

© 2011 Thrane & Thrane A/S. All rights reserved.

Trademark Acknowledgements

•

Thrane & Thrane

is a registered trademark of Thrane & Thrane A/S in the European

Union and the United States.

•

SAILOR

is a registered trademarks of Thrane & Thrane A/S.

•

Other product and company names mentioned in this manual may be trademarks or
trade names of their respective owners.

GPL notification

The software included in this product contains copyrighted software that is licensed
under the GPL/LGPL. The verbatim licenses can be found online at:

http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

You may obtain the complete corresponding source code from us for a period of three
years after our last shipment of this product, which will be no earlier than December 31,
2015, by sending a money order or check for DKK 50 to:

SW Technology/GPL Compliance,
Thrane & Thrane A/S,
Lundtoftegaardsvej 93D
2800 Lyngby
DENMARK

Please write "source for product SAILOR 6222 VHF DSC" in the memo line of your
payment.

«
...
2
3
4
5
6
...
»

Summary of Contents for 6222

























































































Reviews:

No comments

Related manuals for 6222

Brand: Raymarine Pages: 90

D-MAS HyperSat 2540

Brand: DanMedical Pages: 103

Brand: QBC Diagnostics Pages: 65

Brand: MADRIX Pages: 12

Brand: Narcotrend Pages: 47

Brand: IBEX Pages: 4

Brand: Tar River Pages: 44

Brand: Tar River Pages: 61

Brand: Yamaha Pages: 16

Brand: EFX Pages: 2

Brand: Magicfx Pages: 25

Brand: Valmont Structures Pages: 8

Brand: Gilson Pages: 8

Brand: PASCO Pages: 3

Brand: Taurus Pages: 44

Brand: Auto Meter Pages: 30

STYLEbutler 5137-0FW050

Brand: DOTLUX Pages: 12

Brand: Giorik Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands